Checklist: Verifying Investment Foundry ISO Certification

Confirm your foundry holds valid ISO 9001, AS9100, or 13485 certification. Check the certificate number, scope, issue date, and expiry. Request the latest third-party audit report and confirm the standard covers your part type and material.
- Verify the certificate number and scope match the specific part type and material you are ordering.
- Check the issue date, expiry date, and surveillance audit status to confirm the certificate is active.
- Request the latest third-party audit report or a certificate of conformity for your specific order.
- Watch for vague scope descriptions, missing subclauses, or mismatched company names on the certificate.
- Do not rely on a certificate displayed on a website. Request a copy of the official document for your records.
Why verify the certificate before placing an order
A foundry may display an ISO 9001 logo on its website, but that logo does not prove the standard applies to your part. The certificate scope defines which products, processes, and sites are covered. If your order falls outside that scope, the certification does not apply to your order.
You need a step by step method to confirm the certification is valid and relevant. This checklist covers the certificate itself, the issuing body, the audit trail, and the documents you should request. It is designed for buyers, engineers, and procurement teams who need to confirm compliance before releasing a purchase order.
Step 1: Obtain the official certificate document
Do not rely on a logo or a verbal statement. Request a copy of the actual ISO certificate, not a marketing image. The certificate should be issued by an accredited certification body.
Check the document for these items:
- The legal name of the foundry, exactly as it appears on the certificate.
- The certificate number, which is unique to that foundry and that standard.
- The standard name and number, such as ISO 9001:2015 or AS9100D.
- The issue date and the expiry date.
- The certification body name and its accreditation details.
- The scope statement, which lists the products, services, and sites covered.
If the foundry cannot provide the certificate within a reasonable time, treat that as a red flag. A legitimate foundry should be able to share the document.
Step 2: Confirm the scope covers your order
The scope statement is the most common source of mismatch. A foundry may hold ISO 9001 for its sand casting division but not for its investment casting line. Or it may cover aluminum and magnesium but not titanium.
Read the scope carefully. Look for these specific terms:
- Investment casting or lost wax casting, not just general metal casting.
- The specific materials you are using, such as stainless steel, titanium, or nickel alloy.
- The part complexity or size range if the certificate lists size or geometry limits.
- The site address, in case the foundry has multiple facilities.
If your order requires a specific material or process not listed in the scope, the foundry may still be able to produce the part. But the ISO certificate does not cover that work under the current certification. Ask for clarification in writing before proceeding.
Step 3: Check the certificate status and audit history
A certificate has an issue date, a surveillance date, and an expiry date. Surveillance audits are periodic reviews by the certification body. If the last surveillance audit is more than twelve months before your order date, the certificate may still be valid, but the foundry is approaching its renewal window.
Ask the foundry for:
- The date of the last surveillance audit.
- The next scheduled audit date.
- Any nonconformities raised during the last audit.
- The corrective action plan, if nonconformities were found.
You do not need to see the full audit report if the foundry claims confidentiality. You can ask for a summary or a certificate of conformity that states the audit was completed without major nonconformities. But you should ask.
Step 4: Verify the certification body is accredited
The certification body must be accredited by a national accreditation body. In many regions, the accreditation body is a government recognized entity. The certificate should list the accreditation body and its accreditation number.
Check that the accreditation body is recognized in your country or region. If you are buying from a foundry in a different country, confirm that the accreditation body is mutually recognized with your local authorities. This is especially relevant for aerospace, medical, and energy sectors.
If the foundry cannot provide the accreditation number, ask why. A missing accreditation number may mean the certification body is not accredited, or the foundry is not comfortable sharing the details.
Step 5: Match the standard to your industry requirements
ISO 9001 is the general quality management standard. It is a baseline. It does not cover aerospace, medical, or nuclear requirements. If your order falls into a regulated sector, you need a specific standard.
The table below shows the common standards and what they cover.
| Standard | Typical Use | Key Focus |
|---|---|---|
| ISO 9001 | General manufacturing | Quality management system |
| AS9100 | Aerospace | Quality plus aerospace specific requirements |
| ISO 13485 | Medical devices | Medical device quality management |
| ISO 27001 | Information security | Data protection and cybersecurity |
| ISO 14001 | Environmental management | Environmental impact and compliance |
If you are sourcing investment castings for an aerospace engine component, ISO 9001 alone is not enough. You need AS9100. If the part is a medical implant, you need ISO 13485. If the foundry only holds ISO 9001, it may still produce the part, but it does not meet the sector specific requirements.
Step 6: Request order specific documentation
The certificate covers the foundry as a whole. It does not cover your specific order. You need order specific documentation to confirm that your part was produced under the certified process.
Request the following for each order:
- A certificate of conformity, signed by the foundry quality manager.
- Material test certificates for the alloy used.
- Dimensional inspection reports, with a reference to the drawing number.
- Nondestructive testing reports, if required by your specification.
- A process history, showing which steps were performed and by whom.
The certificate of conformity should reference the drawing number, the part number, the lot number, and the standard under which the part was produced. If the document does not reference your specific part, it is not order specific.
Step 7: Watch for these red flags
Some patterns suggest the certification is not what it claims to be. Watch for:
- A certificate with a scope that says “metal casting” but does not mention investment casting.
- A certificate with an issue date that is very recent, such as within the last three months. A new certificate may be valid, but it means the foundry has not yet completed a surveillance audit.
- A certificate with a company name that does not match the foundry you are contacting. This can happen if the foundry rebranded, or if the certificate belongs to a subsidiary.
- A certificate with no accreditation number, or an accreditation number that cannot be verified.
- A foundry that refuses to provide the certificate or the audit summary.
- A foundry that says “we are ISO certified” but cannot name the specific standard or the certification body.
If you see any of these patterns, ask for clarification in writing. Do not proceed based on verbal assurance alone.
How to structure your verification records
Keep a verification file for each foundry you work with. Store the certificate, the scope statement, the audit summary, and the order specific documents in one place. This file should be updated each year, or whenever the foundry renews its certification.
If you change suppliers, or if the foundry changes its scope, update the file. If you change the material or the part type, recheck the scope. A certificate that covered titanium three years ago may not cover nickel alloy today if the foundry narrowed its scope during a renewal audit.
The goal is not to distrust the foundry. The goal is to have a clear, auditable trail that your order was produced under a valid quality management system. This protects your project, your customers, and your own compliance records.
Common mistakes to avoid
- Assuming that an ISO logo on a website is sufficient. The logo may be outdated, or it may refer to a different division.
- Confusing ISO 9001 with AS9100 or ISO 13485. They are different standards with different requirements.
- Not checking the site address on the certificate. A foundry may have multiple sites, and not all sites are covered.
- Ignoring the surveillance audit date. A certificate can be valid but close to expiry.
- Not requesting order specific documentation. The certificate covers the foundry, not your part.
- Accepting a verbal assurance instead of a written document. A verbal statement is not an audit trail.
Use this checklist before you release a purchase order. It takes time, but it prevents costly surprises later.
Frequently asked questions
Can I verify an investment foundry ISO certification online?
You can check the certification body website to confirm the certificate number and status. But you should always request a copy of the certificate directly from the foundry for your records.
What is the difference between ISO 9001 and AS9100?
ISO 9001 is a general quality management standard. AS9100 adds aerospace specific requirements, such as traceability, supplier control, and nonconforming product handling. If your part is for aerospace, you need AS9100.
How long does an ISO certificate remain valid?
An ISO certificate is typically valid for three years, with surveillance audits required at one year and two year intervals. The foundry must pass these audits to maintain the certificate.
Do I need to see the full audit report?
No. The full audit report may contain confidential information. You can request a summary, a certificate of conformity, or a statement confirming that the audit was completed without major nonconformities.
What should I do if the foundry refuses to share the certificate?
Treat that as a red flag. A legitimate foundry should be able to provide the certificate or a summary. If they refuse, consider sourcing from a foundry that is transparent about its quality management system.


